L2 Managed Optical Switch with 2*10G SFP+

5 0 Reviews

Equipped with eight SFP slots, all supporting 100M/1000M dual-rate speeds, it can adapt to optical modules with different needs. It is easily compatible with both legacy 100M fiber optic links and modern gigabit networks.
It provides two 10G SFP+ ports, supporting speeds from 1G to 10G, ensuring that data flows at extremely high speeds to the core switch or server after aggregation, effectively avoiding network congestion and clearing obstacles for high-bandwidth applications.
As an L2+ managed switch, it is not just a simple signal transmission relay station, but also has basic Layer 3 routing functions, enabling cross-VLAN access control and traffic isolation.
It adopts a Type-C console management interface, which not only conforms to the wiring habits of current mainstream devices, but also makes device debugging and maintenance more convenient, reducing the hardware adaptation difficulty for IT maintenance personnel.

Model:
HSGQ-3510S

Quantity:
Availability:





Inquiry Datasheet

layer 2 switch managed multilayer l2 switch outdoor smart l2 switch

Product Introduction

Technical Parameter

Key Feature

The HSGQ-3510S is an L2+ managed switch with 8*100M/1000M SFP fiber optic module slots and 2*1G/2.5G/10Gbps SFP+ fiber optic module slots, along with 1*Type-C console management interface. It supports static routing, provides comprehensive security policies, robust QoS policies, and rich VLAN functionality, making it easy to manage and maintain, and meeting the networking access needs of enterprises, residential communities, hotels, office networks, and campus networks.

L2+ managed switch

Environmentally-friendly

Fanless Design for Silent Operation

L2+ managed switch

Featuring a metal enclosure and supporting both desktop and rack-mount installations, the product achieves quiet, efficient operation thanks to its fanless design and optimized power output capabilities. Consequently, its performance remains uncompromised, regardless of the deployment environment.

Support DDM

Digital Diagnostic Monitor

L2+ managed switch

It supports DDM (Digital Diagnostic Monitor) functionality, which helps network administrators easily monitor real-time parameters of SFP and SFP+ optical modules, including supply voltage, bias current, temperature, optical input power, and optical output power.

Supports L2+ Managed Protocol

L2+ managed switch

Supports IPv4/IPv6 dual stack, static routing, DHCP Server, DHCP Relay, DHCP Snooping, IGMP Snooping, STP/RSTP/MSTP, ERPS, Jumbo Frames, Loop Detection, LLDP, LACP, ACL, SNMPv1/v2c/v3, and MQTT.

Hardware and software

redundancy design

L2+ managed switch

Redundancy Protection: Supports hardware and software redundancy design, including redundant power supplies, redundant link protection, and VRRP redundancy to ensure uninterrupted service.

Cybersecurity Network Solution

L2+ managed switch

Supports SSHv2, TLS, DHCP Snooping, IP Source Guard, Dynamic ARP Inspection Protection, RADIUS, TACACS+ user account management, SNMPv3 authentication, and more, making it a comprehensive security solution.

Network Standards	IEEE802.3, IEEE802.3u, IEEE 802.3ab, IEEE802.3z, IEEE802.3ae, IEEE802.3x, IEEE802.1x, IEEE802.1q, IEEE802.1p, IEEE802.1d, IEEE802.1w, IEEE802.1s, IEEE802.3ad, IEEE802.1ab
Interface	8Gigabit SFP fiber optic module slots 2SFP+ 10 Gigabit fiber optic module slots 1*Type-C Console interface (115200,8,N,1).
LED indicator light	PWR 1 (green), PWR 2 (green), SYS (green), Port LED (green)
Network media (cables)	100BASE-TX: Cat 5, 5e and above unshielded twisted pair cable (≤100m) 1000BASE-T: Cat 5e, 6 and above unshielded twisted pair cable (≤100m) 1000BASE-X: MMF, SMF Modules 10GBASE-X: MMF, SMF Modules 10GBASE-SR: OM1/OM2/OM3 or higher MMF (2m～300m) 10GBASE-LR: IEC B1.1 and B1.3 SMF (2m~10000m)
MAC Address Table	16K
Jumbo Frame	12K Byte
Packet buffer	8.4Mbit
Forwarding Modes	Store-and-forward
Switching Capacity	56 Gbps
Packet Forwarding Rate	42 Mpps
Fan	none
Power input	Dual power supply redundancy design, standard configuration includes AC +DC dual power supply AC100-240V, 50/60Hz Industrial Phoenix terminal DC12V, with DC power switch button
Power Supply	20W
Dimensions (LWH)	285x192x44mm, rack mountable
Electrostatic Standard	Contact ±6KV, air ±8KV
Surge Protection	Common mode ± 6KV
Operating Temperature	-10℃~55℃
Storage Temperature	-40℃~85℃
Operating Humidity	10%~90% (Non-condensing)
Storage Humidity	5% ~ 90% Non-condensing
MTBF	50,000 hours

8*Gigabit SFP optical ports + 2*(SFP+) 10 Gigabit optical ports + 1*Type-C Console port.
Supports AC and DC dual power supply redundancy design; standard AC+DC dual power supply , AC100-240V, industrial Phoenix terminal DC12V, with DC power switch button.
Optional support for RTC real-time clock; optional temperature sensor.
Employing a 64M Flash chip and featuring a dual firmware high-reliability design, the device is guaranteed to never become bricked.
Supports STP/RSTP/MSTP link protection technologies and ERPS ring network protocol.
It supports two aggregation modes: static link aggregation and LACP dynamic link aggregation, which effectively increases link bandwidth and improves link reliability, while also enabling load balancing and link backup.
Supports IPv4 / IPv6 dual protocol stack, static routing, DHCP Server, DHCP Relay, and DHCP Snooping.
It has loop detection capabilities and adopts an intelligent resolution mechanism to achieve intelligent network self-healing.
Supports multiple management methods including Type-C Console, Web CLI, Telnet, SSH, and SNMP (v1/v2c/v3).
Supports bilingual (Chinese and English) web interface management, making product debugging simpler and more efficient.
Supports MQTT protocol connection to EDMS cloud management platform, cloud platform supports local deployment and cloud deployment.
Supports firmware upload and download management via HTTP, TFTP, and FTP transfer methods.