HSGQ-X100W3
| Quantity: | |
|---|---|
Extremely Fast Fiber
Optic Essential for Home Access
The HSGQ-X100W3 is connected to the operator's optical fiber network through an optical fiber interface to achieve high-speed, long-distance data transmission. The optical fiber interface usually complies with passive optical network standards such as EPON or GPON to ensure compatibility with the operator's network.
High-Speed Network Interface
Provides a Gigabit Ethernet interface, supporting data transmission rates up to 1Gbps. Suitable for connecting to computers, routers, switches and other wired devices to ensure high-speed and stable network connections.
Easy and Convenient Setup
With its simple setup process, wide compatibility and super high cost-effectiveness, it brings great convenience and benefits to users. Its setup process is simple and clear, and it is easy to use without complicated operations; at the same time, it is widely compatible with various network devices and protocols, ensuring that users can seamlessly access the network; more importantly, its affordable price allows every user to enjoy high-quality network services.
Powerful Wireless Coverage Capability
Supports the WiFi4 standard, providing stable and high-speed wireless network connections. In addition, the ONT may also be equipped with a high-gain antenna such as 2×5dBi to further enhance the wall penetration and coverage of wireless signals, ensuring that users can enjoy a smooth wireless network experience in any corner of their home.
| User interface | 1*10/100/1000M RJ45 2.4G WiFi |
| PON | EPON&GPON mode adaptive Interface type: SC-APC/SC-UPC Network coverage radius: 20KM GPON: upstream 1.25Gbps/ downstream 2.5Gbps Optical receive power: -7dBm~-28dBm Transmitting light power: 0.5dBm~+5dBm EPON: upstream 1. 25Gbps/downstream 1.25Gbps Optical receive power: -7dBm~ -27dBm Transmitting optical power: 0dBm~4dBm |
| Ethernet | 1*10/100/1000M auto-negotiation Full/half duplex mode RJ45 connector Auto MDI/MDI-X 100m distance |
| Size | 130mm(L)×85mm(W)×30mm(H) |
| Environmental | Operating temperature: 0℃～60℃ Operating humidity: 10%～85% (non-condensing) Storage temperature: -40℃～80℃ Storage humidity: 5%～95% (non-condensing) |
| Power Supply | 12V/1A DC Power interface size: 2.1mm/ 5.5mm |
| Power | < 8W |
| Management | WEB/ TELNET/ TR069/ OMCI/ OAM |
Support device - based rate limitation and bandwidth control.
In compliant with IEEE802.3 ah &lTU-T G.984 standard.
Wi - Fi series meet 802.11 n/b/g technical standards.
Up to 20KM transmission distance.
Support data encryption, group broadcasting, port Vlan separation, etc.
Support Dynamic Bandwidth Allocation (DBA).
Support ONU auto - discovery/ Link detection/ remote upgrade of software.
Support port VLAN configuration.
Support QOS configuration.
Support port binding.
Support port forwarding.
Support broadcasting storm resistance function
Support power-off alarm function, easy for link problem detection.
Support ACL to configure data packet filter flexibly.
Specialized design for system breakdown prevention to maintain stable system.
Support software online upgrading.
Support TRO69 for ACS (Auto Config Server).
Support PPPoE/ DHCP Server/ NAT.
Support IPv4/IPv6.
| Indicator | Description | |
| POWER | Power status | On: The ONU is power on |
| Off: The ONU is Power off | ||
| PON | ONU Register | On: Success to register to OLT |
| Blinking: ln process of registering to OLT | ||
| Off: Fail to register to OLT | ||
| LOS | Optical Signals | Red: Optical link lower than receiver sensitivity |
| Green: Optical in normal | ||
| LAN | LAN Port status | On: Ethernet connection is normal |
| Blinking: Data is being transmitted | ||
| Off: Ethernet connection is not set up | ||
| 2.4G | WIFI | On: WIFl function opens |
| Blinking: Data is being transmitted | ||
| Off: WIFI functions closes | ||
