Integration of Television and Network
HSGQ-X411DWC integrates CATV function, i.e. cable TV signal transmission function. This means that users can access Internet and cable TV signals through the same device at the same time, without having to purchase a cable TV set-top box separately, saving space and cost.
Extremely Fast Fiber
Optic Essential for Home Access
HSGQ-X411DWC is a full-featured network device for home or small office use. It not only supports fiber-optic broadband access, but also traditional telephone services and cable TV. It also provides dual-band Wi-Fi and multiple Gigabit wired interfaces, making it suitable for users who need multiple services and high-speed network connections.
Dual-Band WiFi
Enjoy high-Speed Internet Experience
Supports WIFI signals on both the 2.4GHz and 5GHz bands, allowing users to select the band based on their actual needs. With advanced WIFI technology and powerful signal transmission power, the HSGQ optical modem can provide extensive WIFI coverage, ensuring that every corner of a home or office can enjoy a stable wireless network connection.
HSGQ-X411DWC integrates fixed-line telephone communication function. Users only need to connect the fixed-line telephone line to the voice interface of the optical modem to realize the call function, without the need to install additional traditional fixed-line telephone lines, thus simplifying the communication line layout of the home or office.
Multi-Scenario FTTH Solution
HSGQ-X411DWC is suitable for home users, small businesses, and those requiring integrated broadband, voice, and TV services, especially in scenarios that demand high-speed internet access and stable wireless coverage. Its versatility makes it an important device for various applications, including home entertainment, office use, and smart home setups.
| User interface | 4*10/100/1000M RJ45 port 1*USB 1*POTS 300 Mbps(2.4GHz)/866 Mbps(5GHz) |
| PON | EPON&GPON mode adaptive Interface type: SC-APC Security: ONU authentication mechanism Network coverage radius: 20KM GPON: upstream 1.25Gbps/ downstream 2.5Gbps Optical receive power: -7dBm~-28dBm Transmitting optical power: 0.5dBm~+5dBm EPON: upstream 1. 25Gbps/downstream 1.25Gbps Optical receive power: -7dBm~ -27dBm Transmitting optical power: 0dBm~4dBm |
| POTS Port | 1*RJ11 with 3REN Max 1 km distance Balanced Ring, 55V RMS |
| Ethernet | 4x10/100/1000M adaptiv eFull/half duplex mode RJ45 connector Auto MDI/MDI-X 100m distance |
| Size | 160mm(L)×112mm(W)×30mm(H) |
| Environmental | Operating temperature: 0℃~60℃ Operating humidity: 10%~85% (non-condensing) Storage temperature: -40℃~80℃ Storage humidity: 5%~95% (non-condensing) |
| Power Supply | 12V/ 1A DC power interface size: 2.1mm/ 5.5mm |
| Power | < 12W |
| POTS Port | 1xRJ11 Max 1km distance Balanced Ring, 55V RMS |
| Management | WEB/ TELNET/ TR069/ OMCI/ OAM |
| CATV | Bandwidth 54-870MHz Output resistance 75 ohms |
Support device - based rate limitation and bandwidth control.
In compliant with IEEE802.3 ah &lTU-T G.984 standard.
Wi - Fi series meet 802.11 a/b/g/n/ac technical standards.
Up to 20KM transmission distance.
Support data encryption, group broadcasting, port Vlan separation, etc.
Support Dynamic Bandwidth Allocation (DBA).
Support ONU auto - discovery/ Link detection/ remote upgrade of software.
Support port VLAN configuration.
Support QOS configuration.
Support port binding.
Support port forwarding.
Support power-off alarm function, easy for link problem detection.
Support ACL to configure data packet filter flexibly.
Specialized design for system breakdown prevention to maintain stable system.
Support software online upgrading.
Support TRO69 for ACS (Auto Config Server).
Support PPPoE/ DHCP Server/ NAT.
Support broadband and CATV services.
Support CATV service remote shutdown function.
Support IPv4/IPv6.
| Indicator | Description | |
| POWER | Power status | On: The ONU is power on |
| Off: The ONU is Power off | ||
| PON | ONU Register | On: Success to register to OLT |
| Blinking: ln process of registering to OLT | ||
| Off: Fail to register to OLT | ||
| LOS | Optical Signals | Red: Optical link lower than receiver sensitivity |
| Green: Optical in normal | ||
| LAN | LAN Port status | On: Ethernet connection is normal |
| Blinking: Data is being transmitted | ||
| Off: Ethernet connection is not set up | ||
| 2.4G | WIFI | On: WIFl function opens |
| Blinking: Data is being transmitted | ||
| Off: WIFI functions closes | ||
| 5G | 5G WiFi Status | On: WiFi function opens |
| Blinking: Data is being transmitted | ||
| Off: WiFi function closes | ||
| POTS | POTS status | On: Voice account Registered |
| Off: Voice account not Registered | ||
| WPS | WPS Status | On: Terminal has connected |
| Blinking: Terminal is connecting | ||
| Off: Terminal not connected | ||
| USB | USB Status | USB connection is normal |
| USB connection is not set up | ||
| CATV | CATV Status | CATV Optical power is okay |
| Not optical power or low optical power | ||