HSGQ-X111:
1*10/100/1000M+1*10/100M Ethernet interface(RJ45)
1 EPON & GPON adaptive interface
1 POTS
HSGQ-X111
Availability: | |
---|---|
Quantity: | |
Key Features
● Support device - based rate limitation and bandwidth control
● ln compliant with IEEE802.3ah &ITU-T 6.984 standard
● Up to 20KM transmission Distance
● Support data encryption, group broadcasting, port Vlan separation ,etc.
● Support Dynamic Bandwidth Allocation (DBA)
● Support ONU auto - discovery/Link detection/remote upgrade of software;
● Support port VLAN configuration
● Support power - off alarm function ,easy for link problem detection
● Support Qos configuration
● Support port binding
● Support port forwarding
● Support ACL to configure data packet filter flexibly
● Specialized design for system breakd own prevention to maintain stable system
● Support software online upgrading
● Support TR069 for ACS(Auto Config Server)
● Support PPPoE/DHCP Server/IPTV/POTS/NAT
Voice Service Functions
● With the heartbeat function, support the main producing soft exchange platform
● Support high / low speed mode transparent transmission, T38 two fax
● Support 1PoTS interface and the three party call, three party support local mixing
● Support POTS port GR909 line test function
● Support dynamic PPPoE, DHCP and static IP
● 7* 24 hour call loss is less than or equal to 0.01%
● Support SlP(compatible with lMS),H.248,MGCP three VolP protocol, and the soft switch platform the mainstream can be good intercommunication
● Support lTU-T G.711,6.723.1,G.729 and other three kinds of compression algorithm; echo cancellation conforming to lTU-TG.168-2002, an echo canceller for the longest 128m
● Support high-speed Modem (56Kbps) dial access; support RFC2833 and redundant RFC2833, ringing,MD5 certification, call forwarding, call waiting, the hotline, alarm clock, abbreviated dialing and other value-added services
Technical Parameter
User interface | 1*10/100/100OM RJ45 1*10/100M RJ45 1*POTS; |
PON | EPON&GPON mode adaptive Interface Type:SC-UPC/SC-APC Transmission distance: 20KM GPON: upstream 1.25Gbps /downstream 2.5Gbps Transmitting optical power: 0.5~5dBm Optical receive sensitivity:-7dBm~-28dBm EPON: upstream 1.25Gbps /downstream 1.25Gbps Transmitting optical power: 0~4dBm optical receiver sensitivity:≥-7~-27dBm |
Ethernet | 1*10/100/1000M+1*10/100M auto-negotiation Full/half duplex mode RJ45 connector Auto MDI/MDI-X 100m distance |
POTS Port | 1*RJ11 connector Max 1km distance Balanced Ring,55V RMS |
Size | 140mm(L) x 90mm(W)×30mm(H) |
Environment | Operating temperature:0℃~60℃ Operating humidity:10%~85% (non-condensing) Storage temperature:-40℃~80℃ Storage humidity:5%~95% (non-condensing) |
Power supply | 12V/1A DC power interface size:2.1mm/5.5mm |
Power consumptio | <7W |
Management | WEB/TELNET/TR069/OMCI/OAM |
Product Interfaces and Indicators Definitions
POW
Power status | On: The ONU is power on Off: The ONU is Power off |
PON
ONU Register | On: Success to register to OLT Blinking: In process of registering to OLT Off: Fail to register to OLT |
LOS
Optical Signals | On: Optical link is abnormal Off: Optical in normal |
LAN
LAN Port status | On:Ethernet connection is normal Blinking: Data is being transmitted Off: Ethernet connection is not set up |
POTS
POTS status | On:POTS port Registered Off: POTS port not Registered |