10G SFP+ Dual Fiber Single Mode

5 0 Reviews

High-Speed Transmission: Supports 10Gbps high-speed data transmission to meet high bandwidth requirements.
Long-Distance Transmission: Adopts single-mode optical fiber with long transmission distance, suitable for long-distance networks such as data centers and metropolitan area networks.
Bidirectional Communication: Dual-fiber design supports sending and receiving data at the same time, improving network efficiency.
Hot-Swappable: Can be hot-swapped during device operation for easy maintenance.
Digital Diagnostic Function: Built-in DDM function can monitor the working status of the optical module in real time, which is convenient for fault diagnosis.

Quantity:
Availability:





Inquiry Datasheet

fiber sfp modules for network switch sfp module optical for fttx sfp module on cisco router SFP+ 20km-120km distance

Product Introduction

Technical Parameter

Key Feature

10g dual fiber single mode Full Range of Products Available

SFP Dual Fiber Single Mode

SFP+ Single Mode

The received and sent data are transmitted on two optical fibers, one for sending (Tx) and one for receiving (Rx). It is suitable for scenarios with high requirements for signal transmission quality and stability.

Widely Compatible

Compatible with other brands

It can be adapted to major brands of models and is compatible with most brands. It is suitable for switches, routers, network cards, transceivers and other devices with SFP optical ports.

DDM Detection

Faults are Clearly Visible

dual fiber mode

Real-time monitoring of module working status helps network management units to predict and locate faults, quickly find fault locations, simplify work, and make installation and maintenance easier.

Imported Chips, Stable Transmission

sfp+ module120km

Adopt high-quality main control chip and thickened gold-plated finger technology, real-time automatic calibration of model deviation, effectively avoiding error transmission.

Package	Model	Data Rate	Distance	Wavelength	Laser	Interface	Working Temperature	Receiving Sensitivity
SFP+	SFP-10G-10LR-31	10.3125Gbps	10KM	TRx1310	DFB/PIN	LC	0-70℃ or -40~85℃	<=-30dBm
SFP+	SFP-10G-20LR-31	10.3125Gbps	20KM	TRx1310	DFB/PIN			<=-32dBm
SFP+	SFP-10G-40ER-31	10.3125Gbps	40KM	TRx1310	DFB/PIN			<=-32dBm
SFP+	SFP-10G-40ER-55	10.3125Gbps	40KM	TRx1550	EML/APD			<=-32dBm
SFP+	SFP-10G-60ER-31	10.3125Gbps	60KM	TRx1310	DFB/PIN			<=-32dBm
SFP+	SFP-10G-60ER-55	10.3125Gbps	60KM	TRx1550	EML/APD			<=-32dBm
SFP+	SFP-10G-80ZR-55	10.3125Gbps	80KM	TRx1550	EML/APD			<=-32dBm
SFP+	SFP-10G-100ZR-55	10.3125Gbps	100KM	TRx1550	EML/APD			<=-32dBm
SFP+	SFP-10G-110ZR-55	10.3125Gbps	110KM	TRx1550	EML/APD			<=-32dBm
SFP+	SFP-10G-120ZR-55	10.3125Gbps	120KM	TRx1550	EML/APD			<=-32dBm

2-wire interface for management specifications compliant with SFF-8472 digitaldiagnostic monitoring interface for optical transceivers.
Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and10 Gigabit small form factor pluggable module “SFP+”
10Gb/s serial optical interface compliant to 802.3ae 10GBASE-LR
Operating case temperature: 0 to 70 'C or-40 to 85°C
All-metal housing for superior EMl performance
Low power consumption
Advanced firmware allow customer system encryption information to be storedin transceiver
Cost effective SFP+ solution, enables higher port densities and greater bandwidth
RoHS compliant