HSGQ-SFP+DAC:
· Support for multi-gigabit data rates up to 10.5Gbps
· Data rates backward compatible to 1Gbps
· Hot-pluggable SFP 20PIN footprint
· I/O Connector designed for high speed differential signal applications
| Quantity: | |
|---|---|
HSGQ’s 10g SFP + passive cable uses shielded high-speed differential cable, which conforms to 10 Gigabit Ethernet standard and SFP multi-source protocol (MSA) standard, supports 10g transmission rate, and can also be downward compatible with 1g rate. SFP + passive cable is the preferred solution for short distance application, which is widely used in data transmission between data center and cabinet or between adjacent cabinets. Its biggest characteristics are low cost, ultra-low power consumption (less than 0.1W) and high reliability.
Features
● Support for multi-gigabit data rates up to 10.5Gbps
● Data rates backward compatible to 1Gbps
● Hot-pluggable SFP 20PIN footprint
● I/O Connector designed for high speed differential signal applications
● Improved Pluggable FormFactor(IPF) compliant for enhanced EMI/EMC performance
● Compatible to SFP+ MSA
● Compatible to IEEE 802.3ba and SFF-8431
● Power Supply :+3.3V
● Low power consumption: 0.01 W (typ.)
● Temperature Range: 0~ 70 °C
● Comply with RoHS 2.0
Applications
● 10g Ethernet
● High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
● Switched fabric I/O such as ultra high bandwidth switches and routers
● Data center cabling infrastructure
● High density connections between networking equipment
Recommended Operating Conditions
Systems
Pin Descriptions
1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor
2. Passive cable assemblies do not support LOS and TX_DIS
Mechanical Dimensions
Ordering information
Note: You can be customized diameter and distance.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by company before they become applicable to any particular order or contract. In accordance with company policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of company or others. Further details are available from any company sales representative.
HSGQ’s 10g SFP + passive cable uses shielded high-speed differential cable, which conforms to 10 Gigabit Ethernet standard and SFP multi-source protocol (MSA) standard, supports 10g transmission rate, and can also be downward compatible with 1g rate. SFP + passive cable is the preferred solution for short distance application, which is widely used in data transmission between data center and cabinet or between adjacent cabinets. Its biggest characteristics are low cost, ultra-low power consumption (less than 0.1W) and high reliability.
Features
● Support for multi-gigabit data rates up to 10.5Gbps
● Data rates backward compatible to 1Gbps
● Hot-pluggable SFP 20PIN footprint
● I/O Connector designed for high speed differential signal applications
● Improved Pluggable FormFactor(IPF) compliant for enhanced EMI/EMC performance
● Compatible to SFP+ MSA
● Compatible to IEEE 802.3ba and SFF-8431
● Power Supply :+3.3V
● Low power consumption: 0.01 W (typ.)
● Temperature Range: 0~ 70 °C
● Comply with RoHS 2.0
Applications
● 10g Ethernet
● High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
● Switched fabric I/O such as ultra high bandwidth switches and routers
● Data center cabling infrastructure
● High density connections between networking equipment
Recommended Operating Conditions
Systems
Pin Descriptions
1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor
2. Passive cable assemblies do not support LOS and TX_DIS
Mechanical Dimensions
Ordering information
Note: You can be customized diameter and distance.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by company before they become applicable to any particular order or contract. In accordance with company policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of company or others. Further details are available from any company sales representative.
