Views: 0 Author: Site Editor Publish Time: 2023-06-20 Origin: Site
A standard 10G Optical module whose components include: [base, lower pressing block, PCB board, upper pressing block, spring, latch (unlocking part), pull ring, screw, sheet metal part (upper cover)]
The assembly steps of a standard 10G Optical module: [Install the lower pressing block into the base → Install the PCB → Install the pressing block → Place the radiator → Place the spring into the belt buckle, and then install it into the base → Install the pull ring → Cover the sheet metal parts → Install the screw → Pull the ring by hand to see if it is elastic]
Note: Strictly check the Optical module to determine whether a Optical module is successfully assembled. So how to check? We pull the pull ring of the Optical module by hand. If it has good elasticity, it means that the assembly has been successful. On the contrary, if it has no elasticity, it means that the assembly of Optical module has failed.
There are so many steps required to form a finished Optical module. It seems tedious, but in practice, you will find it is very simple and can be skilled quickly. But even if it is simple, if you do not observe carefully and write down every detail, it is easy to forget one or two steps, and the Optical module is never qualified.
