Views: 0 Author: Site Editor Publish Time: 2023-02-24 Origin: Site
1. Roll up the pull ring of the SFP light module upward, stuck the top buckle, pinch the two ends of the SFP light module with your hands, and push it into the SFP slot until the SFP module is tightly in contact with the slot (you can feel the SFP light module module module module At the top and bottom shot, stuck SFP slot)
2. Equipment/When you pull out the SFP light module, we must wear anti -electrostatic wrists
3. In the case of no excellent place, do not plug out the SFP light module directly, which may cause the electronic component in the SFP optical module or the SFP slot to be penetrated by electrostatic and constitute the device damage.
4. Wire the pull ring of the SFP light module to the horizontal position to eliminate the fixed contact between the shymark and the SFP slot, forcibly pull out the SFP light module, and the buckle in the barrier or the slot.
The SFP optical module is a small-scale hot-insertable light and transceiver module. It is widely used in communication operations. There are many types of SFP light modules, such as: BIDI-SFP, electric port SFP, CWDM SFP, DWDM SFP, SFP+light module, etc. In addition, about the same type of XFP, X2, and XenPak light modules, the SFP light module can not only connect directly with it, but also has the characteristics of lower costs lower than its. Essence Here we will briefly talk about some basic concepts of the SFP light module.
