Precautions for using the light module.huawei compatible sfp module manufacturer

Precision optical elements and circuit components are integrated in the light module. During the daily use process, pay attention to the operation according to specifications, otherwise it will easily cause damage to the light module. The following is the precautions for daily use of light modules:

Install the module correctly.

Make sure the module is installed properly. When installing the light module, the module should be inserted into the bottom, and the pop sound or feel slightly vibrated, indicating that the module card lock card is in place. When the optical module card is not in place, the golden finger and the connector on the single board are contacting micro -contact, and the link may be connected. However, in the case of vibration and collision, the light module will instantly break or even loose;

b. There are ceramic parts inside the light module. Be careful when taking the light module. If you accidentally fall down or bump hard, it is not recommended to put the light module on the shelf to avoid follow -up failure;

C. When inserting the optical fiber line into the optical module, you need to move gently. Insert the light mouth, excessive force or oblique insertion may damage the light module;

d. Most of the light modules support hot insertion, but it is not recommended for regular hot insertion, which can easily cause electrical damage;

e. Confirm the action specification of the lighting module: When taking the light module, do not touch the golden finger part of the light module to avoid damaging the light module; when inserting the light module, confirm the handle of the light module on the light port of the light module, and then insert it into ; When pulling out the light module, first unplug the fiber line, and will pull the handle to the position of about 90 degrees with the light mouth, and then slowly pull it out. Do not excessive force when you pull out or pull your hands without being in place, it may damage the shielding of the light module.