HSGQ-SG2016P
| Quantity: | |
|---|---|
20 Port gigabit Intelligent standard PoE switch,using high-quality high-speed network lC and the most stable PoE chip, PoE meets 802.3af/802.3at standard, this series of PoE switch can be 10/100/1000M Ethernet. The network provides a seamless connection, and the PoE power port can automaticly detect and power the powered devices that comply with the lEEE802.3af /lEEE802.3 at standards. The non-PoE device intellijently detects no power and only transmits data.
PoE is power over ethernet, which refers to the transmission of data signals to some lP-based terminals (such as lP phones, wireless access AP, network cameras, etc.), but aso provides DC power for the device. Technically, these devices that receive DC power are called powered devices.
With simple and convenient installation and mainenance methods and rich business features, it helps users to build a safe and reliable high-performance network. lt is mainly locaed in the core or convergence layer of user networks such as industrial parks, buildings, factories and mines, government agencies, and residential broadband; it can be widely used inethernet access scenarios such as small and medium-sized enterprises, internet cafes, hotels, and schools.
Two Types of Uplink Ports
Supports electrical modules and optical modules, and can be flexibly configured according to different networking.
With DIP Switch
Support Default and Extend modes
PoE ports in Extend mode
Ports 9-16 force 10M to automatically activate AI mode
Support PoE QoS Priority, priority ranges from 1 to 16. Enabled by default.
Intelligent PoE Power Supply Stable Transmission does not Exceed the Limit
It provides 8 gigabit PoE ports that comply with IEEE802.3af/at standards, and the maximum output power of a single port is 30W, which can provide stable power supply and data transmission for HD PoE webcams and aps.
Convenient Photoelectric Connection
Remote Networking Worry-Free
The AI mode is automatically enabled 10M speed for Ports 9-16 in Extend mode, and remote networking can be easily implemented at low cost.
Standard 1U Height
Rack Mounted Switch
Standard rack installation, and can be mounted on the wall or desktop, providing different environment different installation methods.
Multi-Scenario FTTX SolutionAbundant Terminal Types to Choose from
| I/O Interface | Power | AC100-240V 50/60Hz |
| Ethernet | 16*Gigabit PoE Ports | |
2*Gigabit Ethernet ports | ||
| 2*Gigabit SFP Ports | ||
| Performance | Bandwidth | 40Gbps |
| Pack Forward Rate | 29.76Mpps | |
| Package Cache | 3Mbit | |
| MAC Address | 8K | |
| ForwardingMode | Storage & forward | |
| Standard | Network Protocol | IEEE802.3 (Ethernet) |
| IEEE802.3u (Fast Ethernet) | ||
| IEEE802.3ab (Gigabit Ethernet) | ||
| IEEE802.3x (Flow Control) | ||
| IEEE 802.3z (Gigabit Etheret Fiber Standard) | ||
| PoE Protocol | IEEE802.3af (15.4W) | |
| IEEE802.3at (30W) | ||
| PoE port output voltage: DC 44-57V | ||
| PoE power supply core: 1/2+; 3/6- | ||
Network Medium | 10Base-T: Cat 3, 4,5 Class or above UTP/STP (≤100m) | |
| 100Base-TX: Cat 5 Class or above UTP/STP (≤100m) | ||
| 1000Base-TX: Cat 5 Class or above UTP/STP (≤100m) | ||
| Optical Media | Multimode optical fiber: 50/125, 62.5/125, 100/140um | |
| Single-mode optical fiber: 8/125, 8.7/125,9/125, 10/125um | ||
| Environmental Standards | Working Environment | Working Temperature: -10~50°C |
| Storage Temperature: -40~70°C | ||
| Working Humidity: 10%~90%, non-condensing | ||
| Storage Humidity: 5%~95%, non-condensing | ||
| Structure Size | Product Dimensions: 320*207*44mm | |
| Package Dimensions: 370*290*85mm | ||
| Product N.W: 1.78kg | ||
| Product G.W: 2.28kg | ||
| Packing Info | Carton Dimensions: 445*310*390mm | |
| Packing Quantity: 5 Pcs | ||
| Packing Weight: 12.4KG | ||
| Power Voltage | Input voltage: AC 100-240 V50-60Hz | |
| Supply power: 52V/3.84A | ||
| Power | Non PoE board power: maximum 10W | |
| PoE power: maximum 180W |
16*10/100/1000M PoE Ports+2*Gigabit Uplink+2*Gigabit SFP Ports.
Comply with lEEE 802.3, IEEE 802.3u, IEEE 802.3ab standard.
Ethernet Ports support 10/100/1000M self - adaptive.
PoE priority is supported, from port 1 to port 16, which is enabled by default.
Flow control mode: full-duplex adopts lEEE 802.3x standard, half-duplex adopts Back pressure standard
Zero configuration feature, automatically supplied to adaptive equipment.
Panel indicator monitoring status and help failure analysis.
With DlP switch, support Default and Extend modes.
Support port lightning surge: common mode 4KV, differential mode 2KV (level B); Electrostatic ESD: air 8KV, contact 6KV (level B)
